Daily limits: the 11-hour driving limit and 14-hour shift clock
Calculate a driver’s daily availability and identify which limit comes first.
What the two daily limits measure
The 11-hour driving limit is the maximum driving time allowed after at least ten consecutive hours of qualifying rest. Only time spent driving uses these eleven hours. Loading, fueling, and other non-driving work do not.
The 14-hour shift clock sets the deadline for ordinary driving. It starts when the driver first comes on-duty after qualifying daily rest and runs for fourteen consecutive hours. Work, driving, and ordinary off-duty breaks all use this time.
Driving must fit both limits: no more than eleven driving hours, all within the fourteen-hour shift clock. Non-driving work may continue after that deadline, but it counts toward the work-cycle limit.
Apply the limits to one day
| Measure | Used | Remaining before other limits |
|---|---|---|
| 11-hour driving limit | 8 driving hours | 3 driving hours |
| 14-hour shift clock | 10 elapsed hours | 4 hours on the shift clock |
Loading also counts toward the 60/70-hour work-cycle limit. Driving counts toward the daily driving limit, shift clock, and work-cycle limit.
Start at 6 a.m. after qualifying daily rest. Load for 2 hours, then drive for 8 hours.
At 4 p.m.
11-hour driving limit3 hours left
14-hour shift clock4 hours left
Loading used shift time without using driving time. The driving limit is the tighter daily limit at this point.
An ordinary off-duty stop leaves the shift clock running. Compare both daily limits, then check cycle hours and the break rule.
Use the earliest limit
Before driving, check the driving time remaining, shift clock, work-cycle hours, and thirty-minute break requirement. The trip must fit every applicable limit.
Pause and apply
Three driving hours remain, but only one hour left on the shift clock. How much ordinary driving can you plan?
Read the reasoning
At most one hour. Cycle hours or the break requirement could allow less.
What to check as the reviewer
- Find the first on-duty event after qualifying rest and calculate the shift-clock deadline.
- Compare remaining driving, shift clock, cycle, and break time before dispatch adds a leg.